Product catalog

Products

Insulation Shells
More about the products
insulation shell for inclined stop valves
figure 471 10
  • closed-cell foamed polyethylene, sound insulation
insulation shell for MULTI-THERM valves
figure 471 11
  • closed-cell foamed polyethylene, sound insulation
insulation shell for MULTI-FIX-PLUS static balancing valve, as of 01/2017
figure 471 26
  • closed-cell foamed polyethylene, sound insulation
insulation shell for UP-PLUS and ETA-THERM valves
figure 471 14
  • closed-cell foamed polyethylene, sound insulation
insulation shell for quarter turn stop valves and CONTROL-PLUS sensors
figure 471 19
  • closed-cell foamed polyethylene, sound insulation
insulation shell for MULTI T-PIECE
figure 471 28
  • closed-cell foamed polyethylene, sound insulation
insulation shell for KHS CoolFlow cold water balancing valve
figure 471 27
  • closed-cell foamed polyethylene, sound insulation
insulation shell for ball valve
figure 471 24
  • made of expanded polypropylene
insulation shell for stop valve water meter combinations CLASSIC
figure 471 16
  • closed-cell foamed polyethylene, sound insulation
insulation shell for stop valve water meter combinations CLASSIC VAV
figure 471 17
  • closed-cell foamed polyethylene, sound insulation
insulation shell for stop valve water meter box
figure 471 18
  • a one-piece moulding of expanded polystyrene, sound insulation
Insulation shell for Flow-Splitter
figure 471 20
  • simple installation using the insulation clips or diffusion-resistant lockable using standard adhesives
Back to Product Overview

Save energy in a sustainable way in accordance with requirements

Fast, economical, reliable

Insulation ensures KEMPER valves are installed quickly and inexpensively and helps to prevent:

  • Energy/heat loss
  • Condensation formation in accordance with DIN 1988-200
  • Bacterial growth in PWC/PWH systems in accordance with VDI/DVGW 6023

Benefits at a glance:

  • with CE labelling
  • Made of PE material, suitably shaped for KEMPER valves
  • Building material class B1 in accordance with DIN 4102 T1
  • High temperature resistance
  • Low thermal conductivity
  • No condensation formation
  • Quick and easy installation
  • Impermeable if bonded with standard adhesives
  • Reliable closing thanks to the mounting clips included

 

Permanent or also removable: everything is possible

Insulation shells must be shut reliably by means of fixing clips such that they can be released again or can be permanently bonded using standard adhesives to prevent condensation.