KHS Flush Point, 230 V, with CONTROL-PLUS, figure 684 05

KHS Flush Point, 230 V, with CONTROL-PLUS

figure 684 05

complete Flush Point for automatically triggering water change to ensure proper operation
enables turbulent water exchange in drinking water pipes up to DN 100 (double turbulent up to DN 65)
WESER stop valve as maintenance cut-off

Product datasheet PDF

Show planning data on pdod.de

figure 684 05

figure 684 05

Site navigation

Product features Standards & approvals Technical data CAD models Planning data Downloads Spare parts Accessory of

Product Features

complete Flush Point for automatically triggering water change to ensure proper operation
enables turbulent water exchange in drinking water pipes up to DN 100 (double turbulent up to DN 65)
WESER stop valve as maintenance cut-off
CONTROL-PLUS flow and temperature sensor
incl. cable, M12x1
quarter-turn stop valve PLUS with spring return actuator, 230 V, incl. electroless reset
flow limiter, 4, 10 and 20 l/min
for pressure independent flow limitration
free drain with overflow sensor
for integration in existing KHS mini control system
wetted metal parts made of stainless steel and gunmetal
easy maintenance while installed
with a black handwheel
free from dead spots
for vertical installation
drainage device in accordance with DIN EN 1717 with built-in float switch
Open position indicator

Standards and Approvals

WRAS approval
plastic parts with KTW and W 270 approval
according to accepted materials list from German environmental agency
ÜA-Reg.-Nr. R-15.2.3-21-17048, WIEN-ZERT

Technical data

pressure rating PN 10
min. operating temperature 0 °C
max. operating temperature 65 °C
max. ambient temperature 55 °C
protection class IP54
power supply 230 V AC
elapsed time for actuated changeover 90 s
elapsed time for spring driven changeover 15 s

Part no.	DN	A1	D1 (mm)	H1 (mm)	H2 (mm)	L1 (mm)	L2 (mm)	L3 (mm)	minimum flow pressure (MPa)	nominal connection diameter, waste water (mm)	kg
6840501500	15	Rp 1/2	50	352	46.5	110	67.5	100	0.1	50	4.1

CAD models

Part no.	DN	CAD model
6840501500	15	Show 3D data

Planning data

Show planning data on pdod.de

Downloads

Data sheet

File type

Product datasheet

pdf

Instructions

File type

Installation and operating instructions CONTROL-PLUS flow and temperature measuring fitting

pdf (1.6 MB)

Installation instructions for KHS flushing groups

pdf (1.7 MB)

Installation and operating instructions KHS VAV-PLUS full-flow shut-off valve with spring-return actuator

pdf (2.6 MB)

Installation and operating instructions Free drain with overflow monitoring

pdf (1.7 MB)

Technical information

File type

Spare Parts List

pdf (4.1 MB)

KHS wiring instructions

pdf (438 KB)

Accessory of

KHS Mini Control System SLAVE

figure 686 02 006

figure 686 02 006

KHS Mini Control System MASTER 2.1

figure 686 02 008

figure 686 02 008

Spare parts

sensor replacement set CONTROL PLUS

figure 138 4G 1

figure 138 4G 1

spring return actuator 230V for KHS quarter turn stop valves

figure 686 00 007/008

figure 686 00 007/008

spare parts set float switch for free drain

figure 688 00 001

figure 688 00 001

aerator set incl. flow limiter (4, 10, 20 l/min) for KHS Flush Points, Figure 684 00/01/04/05

figure 684 10 001

figure 684 10 001