PROTECT RPZ backflow preventer, type BA, flanged

figure 361 01

  • to protect drinking water against backflow of fluids up to and including category 4 according DIN EN 1717 / DIN 1988-100
  • wetted parts made of stainless steel
  • integrated differential pressure controlled and low-maintenance protection cartridge including CV

Product Features

  • to protect drinking water against backflow of fluids up to and including category 4 according DIN EN 1717 / DIN 1988-100
  • wetted parts made of stainless steel
  • integrated differential pressure controlled and low-maintenance protection cartridge including CV
  • with controllable reduced pressure zone
  • flange connection
  • with three assembled valves
  • drain pipe connection from stainless steel HT 150
  • inlet and outlet with check cartridge
  • free from dead spots
  • for horizontal installation, drain valve down
  • maintenance requirements in accordance with DIN EN 806-5 must be complied with

Standards and Approvals

  • DVGW approval
  • according to accepted materials list from German environmental agency
  • DIN 2576 / acc. to EN 12729 / EN 1717

Technical data

  • pressure rating PN 10
  • max. operating temperature 60 °C
  • min. primary pressure 0.15 MPa
figure 361 01
Part no. DN bolt holes D1
(mm)
H1
(mm)
H2
(mm)
L1
(mm)
T1
(mm)
nominal
connection
diameter, waste water (mm)
kg
3610106500 65 4 146 310 270 559 60 146 32
3610108000 80 8 146 310 270 559 60 146 32.5
3610110000 100 8 146 310 300 559 60 146 33
3610115000 150 8 146 350 300 695 60 146 57

CAD models

Part no. DN CAD model
3610106500 65 Show 3D data
3610108000 80 Show 3D data
3610110000 100 Show 3D data
3610115000 150 Show 3D data

Downloads

Data sheet
File type
Product datasheet
pdf
Instructions
File type
Installation and operating instructions PROTECT system separator BA, flange connection
pdf (940 KB)
Technical information
File type
Spare Parts List
pdf (4.1 MB)
Flow Diagram PROTECT RPZ backflow preveter type BA, flanged
pdf (55 KB)