Product catalog

Products

Sampling Valves
More about the products
gunmetal sampling valve
figure 187 00
  • to sample drinking water and determine microbiological parameters according to the German TrinkwV drinking-water regulation
  • wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water
  • sampling pipe can be disinfected by flame
  • can be attached to all Kemper valves with test/drain-port
SST sampling valve
figure 087 00
  • to sample drinking water and determine microbiological parameters according to the German TrinkwV drinking-water regulation
  • Metal parts in contact with the medium made of stainless steel and copper
  • sampling pipe can be disinfected by flame
  • can be attached to all Kemper valves with test/drain-port
sampling valve for connection to angle stop valve
figure 188 00
  • to sample drinking water and determine microbiological parameters according to the German TrinkwV drinking-water regulation
  • sampling pipe can be disinfected by flame
  • inlet 10 x 1.25 pipe, outlet G3/8 male thread with compression nut for 10 mm pipe
  • made of brass, nickel plated
sampling valve with CV for connection to angle stop valve
figure 188 01
  • to sample drinking water and determine microbiological parameters according to the German TrinkwV drinking-water regulation
  • sampling pipe can be disinfected by flame
  • inlet 10 x 1.25 pipe, outlet G3/8 male thread with compression nut for 10 mm pipe
Catalog

Sampling valves

Drinking water quality monitoring – suitable solutions for every installation situation

Existing standards and regulations must be fulfilled – this is the basic prerequisite for a sampling valve. Plumbers, samplers and operators also have additional requirements which must be met. The availability of versions for all areas of application and a cost-saving, variable installation are just as important as the option to use alternative disinfection methods and the ability to take samples easily. In addition, dripping sampling points – even after repeated flaming – or unauthorised removal of water (water theft) are not acceptable.