Product catalog

Products

Accessories for KHS
Aerator set for KHS Hygiene Flush Box PRO, PURE and LITE
figure 689 04 019
  • wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant to aggressive water, stainless steel and drinking water-approved plastics
  • pressure independent limitation of flow
  • free from dead spots
  • plastic parts with KTW and W 270 certification
  • operating pressure PN 10
  • 5l/min,10l/min,15l/min
  • a flow limiter 10l/min is pre-assembled
  • all functional components can be maintained without tools
  • according to UBA (Federal Environmental Agency) valuation basis
cover for KHS HS2® hygiene flushing box
figure 689 07 001
  • for covering KHS HS2® hygienic flushing box when surface mounted
  • DC 01 fine sheet steel, powder-coated RAL 7035
  • Incl. fixing material
CONTROL-PLUS flow measurement valve for KHS HS2® hygiene flushing box
figure 689 4G 001
  • for optional flow measurement in the KHS HS2® hygiene-flushing box
  • wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water
  • for installation in KHS HS2® hygiene-flushing box
  • free from dead spots
connection set surface-mounted CAN bus for KHS HS2® hygiene flushing box
figure 689 06 001
  • for connecting KHS HS2® hygienic flushing box to the KHS Mini Control System
  • for wall fastening
  • 5 m connection cable
connection set flush-mounted CAN bus for KHS HS2® hygiene flushing box
figure 689 06 002
  • for connecting KHS HS2® hygienic flushing box to the KHS Mini Control System
  • for flush-mounted installation
  • 5 m connection cable
BMS connecting cable via digital I/O for KHS HS2® hygiene flushing box
figure 689 05 001
  • for connecting KHS HS2® hygienic flushing box to the KHS LOGIC control system or to the building management system (BMS) via digital I/O
  • 5 m connection cable
service set (4, 10, 15 l/min) for KHS HS2® hygiene flushing box
figure 689 99 001
  • pressure independent limitation of flow
  • plastic parts with KTW and W 270 certification
  • operating pressure PN 10
  • 4 l/min, 10 l/min, 15 l/min
Connection-set
figure 619 01 001
  • for connecting the KHS CoolFlow chiller, figure 618 01 and of the KHS Cool Flow cooler, figure 610 01
  • for shut off for maintenance and repair
  • selected components suitable for both KHS CoolFlow chiller 4.7kW (1.6–5.6) and 7.6kW (2.0–10.0)
  • consisting of: two pipework compensators G 1, one safety valve Rp 1/2 x Rp 3/4, 6 bar, one double nipple R 1/2, two reducing T-pieces Rp 1 x Rp 1/2, two shut-off valves Rp 1, two shut-off valves Rp 1 with drain plugs on both sides, five extensions for pressure gauges and drain valves G 1/4, three pressure gauges with vertical connection G 1/4, two drain valves G 1/4 x G 3/4, one strainer Rp 1, two double nipples R 1, one diaphragm expansion vessel 12 litres, R 1/2, one screw connection R 1/2 x Rp 1/2, one manual regulating valve Rp 1, four ball valves with extended T-handle
  • wetted parts made of gunmetal and drinking-water-approved plastics
  • according to UBA (Federal Environmental Agency) valuation basis
Vibration damper set for chiller
figure 619 02 000
  • vibration damper set for the KHS CoolFlow chiller for body and vibration isolation
  • consisting of 4 square mounting bases with die-cast-aluminium device fastening with rubber vibration element in between
  • incl. screws and washers
  • dimensions (H/W/D) mm 48/65/65
AC/DC converter
figure 686 01 001
  • for the operation of the KHS full flow stop valve with spring-reset servo drive 24 V DC with 24 V AC supply voltage figur 686 01 
  • for installation next to the actuated valve
KHS BACnet Gateway L for MASTER 2.0/2.1
figure 686 02 023
  • interface device for the KHS MASTER 2.0/2.1 mini control system for connection to the building management system
  • protocol translation into in BACnet IP/MSTP
  • for flushing systems with up to 24 slaves
  • LAN RJ45 10/100 MBit/s Ethernet
  • installation on DIN TS35 top-hat rail in accordance with EN60715
KHS BACnet Gateway XL for MASTER 2.0/2.1
figure 686 02 024
  • interface device for the KHS MASTER 2.0/2.1 mini control system for connection to the building management system
  • protocol translation into in BACnet IP/MSTP
  • for flushing systems with up to 62 slaves
  • LAN RJ45 10/100 MBit/s Ethernet
  • installation on DIN TS35 top-hat rail in accordance with EN60715
Modbus TCP/IP licence for MASTER 2.0/2.1
figure 99 3590
  • licence code for activating the Modbus TCP/IP protocol on the KHS MASTER 2.0/2.1 mini control system
  • enables connection to the building management system via Modbus TCP/IP
  • license code can be obtained with MASTER 2.0/2.1 serial number by calling +49 (0) 2761 891-556 or e-mail to Lizenz@kemper-group.com
Reversible cover against unauthorised access for KHS Hygiene Flush Box PRO/PURE/LITE
figure 689 04 026
  • Reversible cover against unauthorised access incl. fastening parts
  • for installation in all installation situations (flush or surface mounted)
  • for installation in dry- or prewall installation systems
Catalog