Products

set for final installation with operating handle

suitable for UP valves Production until 1997
suitable for frost-proof external valves Production until 1998
with chrome-plated collar
including red and blue identification screw

set for final installation as change stopper

suitable for UP valves Production until 1997
suitable for frost-proof external valves Production until 1998
with chrome-plated collar
including red and blue identification screw

Extension for valves, for operating handle assembly set, up to 130 mm

figure 598 00 130

suitable for flush-mounted valves manufactured until 1997 and frost-proof outdoor valves manufactured until 1998
incl. brass clamping ring, suitable for all sizes (the plastic clamping ring required to adjust the shaft diameter out of the final assembly set to be used)

extension for valves, for final assembly set operating grip, to 35 mm

figure 598 00 035

suitable for flush-mounted valves manufactured until 1997 and frost-proof outdoor valves manufactured until 1998
incl. brass clamping ring, suitable for all sizes (the plastic clamping ring required to adjust the shaft diameter out of the final assembly set to be used)

extensions for valves, for final assembly set operating grip, to 65 mm

figure 598 00 065

suitable for flush-mounted valves manufactured until 1997 and frost-proof outdoor valves manufactured until 1998
incl. brass clamping ring, suitable for all sizes (the plastic clamping ring required to adjust the shaft diameter out of the final assembly set to be used)

Extension for valves, for assembly set with operating cover, up to 65 mm

figure 598 02 065

incl. brass clamping ring, suitable for all sizes (the plastic clamping ring required to adjust the shaft diameter out of the final assembly set to be used)
suitable for UP valves Production until 1997

tubular box spanner, size 17/18, 550 mm

figure B5120 500 00

for dismantling and replacing inner top parts of frost-proof outdoor valves, Figures 570–572, and inner top parts of the UP and UP-PLUS series, external hex SW17, UP-PLUS series gunmetal, external hex SW18, stainless steel UP-PLUS and UP series, frost-proof outdoor valves Figures 570–572

socket wrench for flush-mounted valves, for final installation set operating grip

figure B5105 500 00 001

with internal toothing for operation with removed operating grip, suitable for all sizes
suitable for UP valves Production until 1997

socket wrench for flush-mounted valves, for final installation set operating grip

figure B5105 500 00 002

with 7 mm female square drive, for operation of the square spindle after removal of the final installation set, suitable for all sizes
suitable for UP valves Production until 1997

hexagon socket key, size 19

figure B5120 599 00

for dismantling and replacing inner top parts of the ETA-THERM floor balancing valves, internal hex SW19

UP-PLUS inner top part

figure E0109 560 01

to isolate, regulate and pre-set
with stainless steel cone
EPDM-seat gasket
incl. plastic operating spindle that can be cut to length
wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water

combined stop-and check valve inner top part for gunmetal flush-mounted valves UP-PLUS

figure E0109 561 00

EPDM-seat gasket
incl. plastic operating spindle that can be cut to length
wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water
check valve with SST spring

inner top part for flush-mounted valves (from 1985 to 1997) with shaft length to 80 mm

figure E0109 580 00

complete with valve cone and cone seal
suitable for UP valves Production until 1997

inner top part for flush-mounted valves (from 1985 to 1997) with shaft length to 180 mm

figure E0109 582 00

complete with valve cone and cone seal
suitable for UP valves Production until 1997
110 mm, shortenable to any length

stainless steel UP-PLUS inner top part

figure E0120 056 00

to isolate, regulate and pre-set
EPDM-seat gasket
incl. plastic operating spindle that can be cut to length
wetted parts made of stainless steel

plastic shaft for UP-PLUS flush-mounted valves and UP-PLUS extension set

figure L0100 560 00

glass fibre-reinforced, continuous external thread, one-way socket for screwing onto flush-mounted valve housing and flush-mounted shafts, 90 mm, shortenable to any length

control spindle for flush-mounted valves UP-PLUS

figure P0100 560 00

90 mm, can be cut to lenght
made of plastic
external toothing and internal toothing for connection to the valve bonnet

UP-PLUS extension spindle

figure P0100 562 00

90 mm, can be cut to lenght
made of plastic
external multi toothing and one-way slide-on socket for connection to control spindle of the inner top part