Insulation Shells
insulation shell for inclined stop valves, figure 471 10

insulation shell for inclined stop valves

figure 471 10

  • closed-cell foamed polyethylene, sound insulation
insulation shell for MULTI-THERM thermostatic balancing valve, figure 471 11

insulation shell for MULTI-THERM thermostatic balancing valve

figure 471 11

  • closed-cell foamed polyethylene, sound insulation
insulation shell for MULTI-FIX-PLUS static balancing valve, as of 01/2017, figure 471 26

insulation shell for MULTI-FIX-PLUS static balancing valve, as of 01/2017

figure 471 26

  • closed-cell foamed polyethylene, sound insulation
insulation shell for UP-PLUS and ETA-THERM valves, figure 471 14

insulation shell for UP-PLUS and ETA-THERM valves

figure 471 14

  • closed-cell foamed polyethylene, sound insulation
insulation shell for quarter turn stop valves and CONTROL-PLUS sensors, figure 471 19

insulation shell for quarter turn stop valves and CONTROL-PLUS sensors

figure 471 19

  • closed-cell foamed polyethylene, sound insulation
insulation shell for MULTI T-PIECE, figure 471 28

insulation shell for MULTI T-PIECE

figure 471 28

  • closed-cell foamed polyethylene, sound insulation
insulation shell for KHS CoolFlow cold water balancing valve, figure 471 27

insulation shell for KHS CoolFlow cold water balancing valve

figure 471 27

  • closed-cell foamed polyethylene, sound insulation
insulation shell for ball valve, figure 471 24

insulation shell for ball valve

figure 471 24

  • made of expanded polypropylene
insulation shell for stop valve water meter combinations CLASSIC, figure 471 16

insulation shell for stop valve water meter combinations CLASSIC

figure 471 16

  • closed-cell foamed polyethylene, sound insulation
insulation shell for stop valve water meter combinations CLASSIC VAV, figure 471 17

insulation shell for stop valve water meter combinations CLASSIC VAV

figure 471 17

  • closed-cell foamed polyethylene, sound insulation
insulation shell for stop valve water meter box, figure 471 18

insulation shell for stop valve water meter box

figure 471 18

  • a one-piece moulding of expanded polystyrene, sound insulation
Insulation shell for Flow-Splitter, figure 471 20

Insulation shell for Flow-Splitter

figure 471 20

  • a one-piece moulding of expanded polystyrene, sound insulation
  • simple installation using the insulation clips or diffusion-resistant lockable using standard adhesives

Save energy in a sustainable way in accordance with requirements

Fast, economical, reliable

Insulation ensures KEMPER valves are installed quickly and inexpensively and helps to prevent:

  • Energy/heat loss
  • Condensation formation in accordance with DIN 1988-200
  • Bacterial growth in PWC/PWH systems in accordance with VDI/DVGW 6023

Benefits at a glance:

  • with CE labelling
  • Made of PE material, suitably shaped for KEMPER valves
  • Building material class B1 in accordance with DIN 4102 T1
  • High temperature resistance
  • Low thermal conductivity
  • No condensation formation
  • Quick and easy installation
  • Impermeable if bonded with standard adhesives
  • Reliable closing thanks to the mounting clips included

Permanent or also removable: everything is possible

Insulation shells must be shut reliably by means of fixing clips such that they can be released again or can be permanently bonded using standard adhesives to prevent condensation.