straight seat stop valve

figure 183 02

  • wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water
  • maintenance-free spindle sealing with self-lubricating and under pressure replaceable EPDM-lip gasket
  • EPDM-seat gasket

Product datasheet PDF

Show planning data on pdod.de

Downloads
figure 183 02
figure 183 02
figure 183 02
figure 183 02
figure 183 02

Product Features

  • wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water
  • maintenance-free spindle sealing with self-lubricating and under pressure replaceable EPDM-lip gasket
  • EPDM-seat gasket
  • cone rotatable, protected against water hammer
  • female pipe thread
  • spindle thread not in contact with medium
  • wear-resistant valve seat made of stainless steel up to DN 50
  • with a black handwheel
  • free from dead spots
  • Open position indicator

Standards and Approvals

  • according to DVGW regulations
  • plastic parts with KTW and W 270 approval
  • according to accepted materials list from German environmental agency
  • DIN EN 1213
  • ÜA-Reg.-Nr. R-15.2.3-21-17048, WIEN-ZERT

Technical data

  • pressure rating PN 16
  • max. operating temperature 110 °C
figure 183 02
Part no. DN A1 D1
(mm) 		H1
(mm) 		L1
(mm) 		T1
(mm) 		kg
1830201500 15 Rp 1/2 60 105 62 13.2 0.37
1830202000 20 Rp 3/4 60 115 74 14.5 0.52
1830202500 25 Rp 1 70 140 82 16.8 0.77
1830203200 32 Rp 1 1/4 70 167 98 19.1 1.16
1830204000 40 Rp 1 1/2 90 170 105 19.1 1.42
1830205000 50 Rp 2 90 202 125 23.4 2.15

Planning data

Show planning data on pdod.de

Downloads

Data sheet
File type
Product datasheet
pdf
Technical information
File type
Spare Parts List
pdf (4.1 MB)