Products

differential pressure measurement set

figure 360 99

• for the prescribed annual maintenance of RPZ backflow preventers according to DIN EN 806-5

test valve with union adaptor for inspection of RPZ valves FK-4

figure 367 06

• to test the function of FK-4 RPZ backflow preventer using the differencial pressure measurement set (figure 360 99)

locking operating handle for FK-4

figure 367 05 001

• to secure the tap
• for subsequent installation on FK-4 RPZ backflow preventer outlet type BA, figure 367 01, year of construction 2014 and later

test valve set for inspection of RPZ valves FK-4

figure 367 07

• to test the function of FK-4 RPZ backflow preventer using the differencial pressure measurement set (figure 360 99)
• for connection to primary and reduced pressure zone

water sensor

figure 620 00 001

• to be connected to KEMPER leak-detection system
• to detect water on ground (min. 0,5 mm)
• with 4 mm bolt hole for wall fastening
• for connection to the KHS MASTER 2.1 mini system controller

FK-5 Water Supply Set Plus

figure 369 01

• pre-assembled
• wetted parts on the drinking water side made of gunmetal, stainless steel and drinking water approved plastics

Container cleaning set for FK-5 and FK-5 PRO

figure 369 02

• for installation in the storage tank of the FK-5 and FK-5 PRO break tank station
• allows the receiver tank of the FK-5 break tank station to be cleaned and flushed

Rack for FK-5 and FK-5 PRO

figure 369 03

• allows the FK-5 break tank station to be installed on the ground

Overflow monitoring for FK-5 and FK-5 PRO

figure 369 04

• for installation in the drain connection of the FK-5 and FK-5 PRO break tank station
• to protect against overflow due to drain block

Connection-set for FK-5

figure 369 27

• wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water
• for any installation position

Water supply set for FK-5 PRO

figure 369 50 025

• Quarter turn stop valve with actuator and connection accessories
• pre-assembled
• wetted parts on the drinking water side made of gunmetal, stainless steel and drinking water approved plastics

Connection set  for FK-5 PRO

figure 369 57 001

• wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water
• easily replaceable double mesh made of stainless steel
• for any installation position